Original GreenStar Display
Original GreenStar Display: This display was the original GreenStar unit produced by John Deere. It delivered its content in black and white, with a user friendly push-button interface and menu-driven commands. This allowed a user to input information, and view on-the-go operational data, such as parallel tracking, moisture sampling, and yield monitoring.
After its introduction in 1989 in select CTS combines, many John Deere machines and implements came with a GreenStar Display. To add AMS applications, a Mobile Processor, KeyCard and StarFire iTC™ are required.
Greenstar 2 Display
The GreenStar 2 2600: The GreenStar™ 2(GS2) 2600 is a 10.4-in. color touch-screen display. It features a proven full-color screen that allows the operator to configure and simultaneously view multiple applications on any home page. Additionally, the GreenStar displays offer many different mounting options depending on preference and/or cab type.
The GS2 2600 is only compatible on the C-post of 9030 Series MST tractors.
The GreenStar 2 1800 Display: The GreenStar 2 (GS2) 1800 is a 7-in. color display. It features state-of-the-art, full-color screens that allow the operator to configure multiple home pages and quickly toggle through them to monitor many applications that may be running at the same time. The integrated display control features a scroll wheel and 14 buttons.
GreenStar 3 Display
GreenStar 3 2630 Display: The John Deere GreenStar™ 3 (GS3) 2630 Display is a 10.4-in. color display that features a full-color touch screen for controlling a variety of AMS applications, vehicles, and implements. The GS3 2630 also allows operators to set up multiple home pages and navigate to each home page easily and efficiently, all while other applications are in use. The GS3 2630 is specifically designed for customers who desire maximum efficiency, productivity, and premium features.
GreenStar 3 Command Center: The GreenStar 3 (GS3) Command Center is the central information system used on all new R Series tractors and S Series combines. It is located on the end of the CommandARM™ or on the right-hand console. The GS3 Command Center allows the operator to program various settings and tailor the readings to a specific operation as it is displayed on a 178-mm (7-in.) color display is divided into three regions: left hand, center, and right hand.
The left-hand region can be configured by the operator to monitor three tractor functions of their choice. The right-hand region shows the shortcut keys to desired information. Operators can program additional shortcut keys that appear in the right-hand region. The center region either shows the main home pages or displays the information relative to the current settings the operator is adjusting.